The working wavelength of EDFA Optical Amplifier falls precisely within the optimal wavelength range of 1330-1600nm for fiber optic communication. EDFA Optical Amplifier working in the C-band (1530-1565nm) with the lowest fiber loss window have been widely used. In order to fully utilize the bandwidth resources of optical fibers, people are also committed to developing EDFA Optical Amplifier in the L-band (1570-1610nm). The L-band is located at the tail of the EDFA amplifier gain spectrum, so the L-band EDFA Optical Amplifier must use longer fibers and higher pump power, or use highly doped fibers. EDFA Optical Amplifierhas high gain (greater than 30-50dB) and provides flat gain over a wide frequency band (up to 30nm), making it suitable for amplifying signals in multiple optical channels, especially in dense wavelength division multiplexing (DWDM) systems. Low noise (4-8dB), approaching the quantum limit. When applied to WDM systems, the crosstalk between channels is minimized and multiple amplifiers can be cascaded.
Having a high saturation output power (10-20 dBm), it can be used as a power amplifier after the transmitter to increase the transmission distance or allocated number of optical nodes without relay lines. The required pump power is low (tens of milliwatts). The gain is independent of the polarization state of the fiber, so it has good stability. Easy to couple with transmission optical fibers, with low coupling loss (<1dB). Except for the pump source, EDFA Amplifier is composed of passive components. Therefore, compared with complex and expensive electronic regenerative relays, the system cost is significantly reduced and the reliability is improved.
In addition, the amplification characteristics of EDFA Amplifier are independent of the system bit rate and data format, so it can amplify and transmit both digital and analog information.The disadvantages of EDFA Optical Amplifier are: large size; The lifespan of the pump source is not long; It cannot be integrated with other devices, which limits the application of EDFA Amplifier in optoelectronic integration (OEIC). In addition, the gain bandwidth of EDFA Optical Amplifier only covers a part of the low loss window of quartz single-mode fiber, which limits the number of wavelength channels that the fiber can accommodate, which is also its shortcoming.
Media Contact
Company Name: Beijing Rofea Optoelectronics Co., Ltd.
Email: Send Email
Country: China
Website: https://www.bjrofoc.com/